saw bandpass filter F9153 part no. F9153 rev. date 2010-03-15 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr8011-as03 1/7 4 5 6 1 23 1 23 65 4 features rf bandpass filter usable bandwidth 5mhz high attenuation no matching 50 single-ended operation ceramic surface mounted device package ( 3.0 mm 3.0 mm ) rohs compliant package dimensions dimensions shown are nominal in millimeters body : al 2 o 3 ceramic lid : kovar, ni plated terminations : au plating 0.3 ~ 1.0 um, over a 1.27 ~ 8.89 um ni plating maximum ratings parameters unit minimum typical maximum operating temperature range c -40 25 85 storage temperature range c -45 25 85 power handling capability dbm 15 electrostatics sensitive device ( esd ) pin configurations 2 input 5 output 1, 3, 4, 6 case ground i ii i 915 915 915 9153 33 3
saw bandpass filter F9153 part no. F9153 rev. date 2010-03-15 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr8011-as03 2/7 specifications notes : 1) all specifications are based on the matching s chematic shown below, measured by agilent network a nalyzer and full 2 port calibration. 2) electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances minimum typical maximum unit center frequency ( fc ) - 915 - mhz insertion loss (in fc 2.5 mhz) - 2.5 3.5 db amplitude ripple (in fc 2.5 mhz) - 0.5 1.0 db vswr (in fc 2.5 mhz) - 1.5 2.0 relative attenuation 0.3 mhz ~ 840 mhz 869 mhz ~ 894 mhz 970 mhz ~ 1500 mhz 1500 mhz ~ 3000 mhz 40 30 35 25 50 40 40 30 - - - db input/output impedance 50 ohm
saw bandpass filter F9153 part no. F9153 rev. date 2010-03-15 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr8011-as03 3/7 input 50 output 50 matching schematic ( actual matching values may vary due to pcb layout and parasitics ) marking configuration 1) i 2) 9153 3) 1) pad number 1 index 2) manufacturer name 3) marking number
saw bandpass filter F9153 part no. F9153 rev. date 2010-03-15 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr8011-as03 4/7 frequency response
saw bandpass filter F9153 part no. F9153 rev. date 2010-03-15 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr8011-as03 5/7 input / output vswr charts input / output smith charts
saw bandpass filter F9153 part no. F9153 rev. date 2010-03-15 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr8011-as03 6/7 packing specification 1. reeling quantity : 3000 pcs / 13 reel ( or 1000 pc s / 7 reel ) 2. taping structure : the tape shall be wound around t he reel in the direction shown below. tape specification 1. leader part and vacant position specification 2. tensile strength of carrier tape 4.4n/mm width 3. top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g reel reel reel reel top cover tape top cover tape top cover tape top cover tape carrier tape carrier tape carrier tape carrier tape end end end end start start start start tape running direction vacant 150mm min. component contained vacant 150mm min. leader part 250mm min. 0~15 degree top cover tape direction of pull carrier tape
saw bandpass filter F9153 part no. F9153 rev. date 2010-03-15 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. nr8011-as03 7/7 carrier tape dimensions [unit : mm] part direction reel dimensions [unit : mm] a 3.40 0.1 b 3.40 0.1 c 7.25 0.1 d 1.70 0.1 e 12.00 0.1 f 8.00 0.1 tape running direction
|
